Car

Complementary information

In 1919, Ferdinand de Vazeilles creates a precision fondry in Nanterre, becoming one of the most renowned in Europe for their die casting technique of special materials used in the automobile and aeronautic fields, for pieces as carburettor or cylinder head.

In the 1930s, he had the idea to use injected metal to create technical toys which were previously made of metal sheets. He named his brand "Solido" to refer to the strength of his material. The first toy vehicles made of zamac were commercialized in 1933. They are mainly convertible toys which are not always representing real car designs.

The Solido company is created in 1937 and is only dedicated to zamac toys.

The constrution parts of the toy car are the bodywork, the frame in which the axletrees are inserted and fixed with two screws to the bodywork.

The schematic representation below gives an overview of the different layers encountered on the object from a first visual macroscopic observation and gives an overview of the degradation phenomena shaped as craters.

There is a lot of cracks on the paint layer and the metal presents localized gaps and cracks. We can observe a certain brilliance on the paint.

The metal is dark grey and, on gaps, there's a heterogenous mix beetween a light grey and a dark grey structure, with some red points. Some cracks are white and seem to have been pushed outward (corrosion under layer of paint ?).

We firstly proceeded to X-ray fluorescence (XRF) to obtain a general idea of the composition of the blue paint layer and of the constitutive metal.

We also realised Scanning Electron Microscopy with back-scattered electrons (SEM-BSE) on four specific locations :

- the paint layer (NMM1);

- the white crust (NMM2);

- the corroded metal (CM1 and CM2).

These stratums can be observed on the stratigraphies in the chapter "Macroscopic observations". The Micorr stratigraphy gives further informations about the results.

The metal is made of zamak alloy, composed of zinc, aluminium, copper and sometimes some magnesium addition. The degradation phenomena observed on the object, shaped as craters, seem typical for the alloy.

Complementary information

A high quantity of silicon has been detected by the SEM-BSE under the paint layer, in every stratum. It is quite difficult to explain the presence of silicon here. We formulated four hypothesis to attempt an answer:

- Silicon can be part of the zamac alloy, as a filler. Calamine, silicate de zinc, [Selwyn p.165]

- Silicon can be a residue of the cast envelop;

- Silicon can be a primer;

- Silicon can be a residue coming from the use of the object or its cleaning

From what we have observed, we understand that there is a need to do further analysis to get more information.

Fédération Forge Fonderie [Online]. https://www.forgefonderie.org/fr/forge-fonderie/materiaux

Selwyn, Lyndsie. "Métaux et corrosion". Un manuel pour le professionnel de la conservation. Institut canadien de conservation.

Wikipedia [Online]. Solido. https://fr.wikipedia.org/wiki/Solido_(mod%C3%A9lisme)